DS600/UNIVERSAL is a machining center that allows to change the working heads depending on the type of job to be performed.

It can accommodate the boring, drilling and tapping fast spindle as well as Ø 600 and Ø 300 turning heads.

The heads are introduced automatically into the unit by means of a 2-position manipulator, which picks them from the head-holder magazine.

Clamping is achieved through a sturdy special attachment developed by Trevisan.

The turning heads are CNC-controlled, by means of a differential system located at the back of the unit.

Turning heads Æ 200 with 70 mm travel can be mounted on the fast spindle. These heads are taken directly from the magazine.

This ruggedly constructed machine is designed to include an excellent chip disposal system and a totally sealed onboard-mounted enclosure, insuring no release of fluid / chips.

All mechanical moving organs of the machine head are made of treated steel and are lubricated through an exclusive oil circuit.

The base frame is made of electro-welded, stabilised steel.

The head is made of Meehanite cast iron.

All axes slide on cross-roller guide shoes and are driven by ball screws with pre-loaded, double lead screw and Brushless motors.

The mechanical organs of the turning head are of sturdy construction, so as to allow heavy removal with utmost reliability.

All movements are governed by the machine CNC.

The rotary, 360.000 stepless indexing table is equipped with guideways and devices designed to accommodate the tool-holder pallets.

The DS600/UNIVERSAL machining centre is equipped with a tool-changer unit located vertically on the column side, fitted with a 2-gripper tool-change manipulator.